Color your own fabric


Look what you can make with a few fabric pens:


These are the supplies I used:
 
 high thread count fabric - I used 200 ct Pima Cotton (don't wash the fabric)
mechanical pencil
black Micron pens in sizes 05 and 005
Fabrico Dual-Tip markers in various colors
Freezer paper
Your own drawing or Clip Art
a light box - optional

For my little quilt, I used Clip Art I found in my publishing software, but you can always use any drawing you choose; in the future, I plan to make a quilt with some of my children's drawings. This is also a great way to make labels for your quilts. The markers are acid free, fade resistant, and will not wash away!

I found these images 
and played with them until I was pleased with the arrangement, color, and size
for the word I used a pretty font, enlarged the letter "A"
and for the "o" used the little heart image after cropping the stem and leaves out

Next, I changed the color to grays and printed it out

Now the fun begins...
first, cut a piece of fabric several inches larger than the design
and tape it on to the paper to keep it from moving during tracing

Using a light box, trace the design on to the fabric using a mechanical pencil

Remove the paper from the back... 


To make the "coloring" process easier, iron the shiny side of freezer paper
to the back of the fabric with the drawing, this way you won't be stretching the fabric with the markers

Now that the fabric is nice and stable, start tracing over the pencil lines with a black Micron 005 pen.
Once you've done this, the next step is very important: you must heat-set your Micron ink with a dry iron.
If you don't do this, it will run when you start coloring with the Fabrico Markers

Make long, light strokes when coloring with the Fabrico markers;
you can always come back and darken any areas by coloring over them again
 That was so much fun!!!

Of course, to be a quilt, it most have a little batting, a backing, and some thread to hold it together,
and since I don't plan to wash this one, I drew some quilting lines for the wall and floor using the mechanical pencil, giving it a little bit of shading

I used white thread for the whole thing and, yeah, made a few mistakes where the white thread showed on the dark coloring, so I just went back and "covered" my little mistakes with the markers...
...Oops! don't tell!

Add a little binding and hanging tabs...
And you're all done!

You've got to try it, you'll feel like a kid again...

Hugs,

Labels: , ,